5-Minute Epoxy Gel, opaque, 25ml, OE#14240

Description

Devcon 5-Minute Epoxy Gel is popular in industrial, professional, and Do-It-Yourself applications.
P/N’s: 14240 is the 25ml syringe, and 14265 is the 50ml cartridge
It is a fast-curing, thixotropic, non-migrating adhesive designed for filling gaps and bonding rough or smooth surfaces. The disappearing blue coloring tells you when the product is thoroughly mixed and ready to apply. It’s a general-purpose adhesive/encapsulant which easily dispenses and mixes in seconds, dries in 15 minutes and reaches functional strength in 1 hour.

KEY FEATURES:
Bonds rigid durable substrates such as metals, glass, ceramics, concrete and wood in all combinations
High tensile strength (2,500 psi)
Good solvent resistance to gas, oil and other solvents
Non-Sag (No-Drip) which makes it ideal for use on walls and vertical surfaces
Excellent gap filling qualities without tremendous shrinkage Fast curing for bond tags on machinery and equipment
Functional strength in 1 hour
100% reactive, no solvents
Intended Uses:
Bonds metals, fabrics, ceramics, glass, wood, and concrete (and in combinations)
Aluminum, Brass, Cast Iron, Copper, Stainless Steel, Carbon Steel & Ferrites, Epoxies, PVC & Vinyls, Woods, Plywoods & Laminates, Particle Boards, Brick, Concrete, Ceramics
Popular for filling voids and potting/filler compounds
Excellent for bonding to walls and vertical surfaces, and for filling gaps and voids
Physical Properties:
Cured 7 days @ 75° F
Adhesive Tensile Lap Shear[GBS] 2,500 psi @ 0.010″ bondline
Dielectric Strength 440 volts/mils
Gap Fill Excellent
Impact Resistance 6.5 ft.lb./in(2)
Service Temperature -40°F to 200°F
Shore Hardness 80 Shore D
Solids by Volume 100
Specific Volume 23.7 in[3]/lb.
Tensile Elongation 5%
Tpeel 2-3 pli

3. Apply firm pressure between mating parts to minimize any gap and ensure good contact (a small fillet of epoxy should flow out the edges to display adequate gap fill.)
For very large gaps:
1. Apply epoxy to both surfaces
2. Spread to cover entire area OR make a bead pattern to allow flow throughout the joint Let bonded assemblies stand for recommended functional cure time prior to handling.